“Glasson Power Supply for DFS3000 Digital Festoon” has been added to your basket. View basket
Arri L7-C LED Fresnel
-
£65.00
16A
5pin In/Out
28mm Male Spigot
Clamp to Spigot Adapter
c/w Optional Barn Door
Related products
-
Glasson LED RGB ES Lamp DFS3000 Digital Festoon
Hire
-
Day Rate
£3.50 / Day -
Week Rate
£5.25 / Week
Location: D4-1Add to basket -
-
LEDJ QB1 RGBA Wireless Uplighter
Hire
-
Day Rate
£25.00 / Day -
Week Rate
£37.50 / Week
Rapid QB1 RGBA is a portable battery powered uplighter outputting ultra-smooth colours from rich saturated hues to subtle pastel shades. The compact and robust housing design makes this fixture extremely portable and easily concealable. The internal lithium battery has an autonomy for up to 18 hours in single colour mode and up to 8 hours of colour fading and chases, while the charging time is only 5 hours. The light source is composed of 4 x 8W high-power RGBA LEDs and the extractable foot allows you to adjust the tilt angle. The on-board wireless DMX Receiver makes for a truly cable free operation and is W-DMX compatible. 3 pin DMXAdd to basket -
-
Cameo Zenit W600 Outdoor LED Wash
Hire
-
Day Rate
£80.00 / Day -
Week Rate
£120.00 / Week
40 x 15 W RGBW LEDs with 21,000 lm total output for uniform and powerful colour mixing 18° beam and 35° field angles without diffuser Optional SnapMag® filter frames for 25°, 45°, 100° or elliptical 90° x 10° beam angle selection and installation without tools or dismantling Built-in 2.4 GHz W-DMX™ transceiver Wireless master-and-slave function Wireless DMX, RDM (via DMX and W-DMX™), standard DMX plus standalone modes with automated programs IP65 rating for outdoor use Temperature controlled fans for optimized operation and low noise 16-bit technology for high-resolution colours and dimmingAdd to basket -
-
ChamSys SnakeSys B4 Artnet Interface
Hire
-
Day Rate
£50.00 / Day -
Week Rate
£75.00 / Week
Universal Ethernet to DMX Interface Four DMX512 Ports (configurable as input or output) One dedicated DMX512 input port Art-Net and ACN Streaming DMX support Can be used with any Art-Net or ACN compliant console Universe selectable by rotary switches ChamNet remote configuration Stand-alone DMX buffer mode Can be powered by Power over Ethernet Isolated outputs Art-Net subnet and universe selection via rotary switches Power, Network and Protocol status LEDs Individual output status LEDs Locking Neutrik Ethercon network connector Locking Neutrik Powercon power connector.Add to basket -